Related Experiment Video
Updated: Mar 29, 2026

Chemical Analysis of Water-accommodated Fractions of Crude Oil Spills Using TIMS-FT-ICR MS
Published on: March 3, 2017
[Characterization of Time-Resolved Laser-Induced Fluorescence from Crude Oil Samples]
Abstract:
To evaluate the feasibility of laser induced time-resolved fluorescence technique for in-situ detection of underwater suspended oil spill, extensive investigations have been carried out with different densities of crude oil samples from six different wells of Shengli Oilfield in this work. It was found that the fluorescence emission durations of these crude oil samples were almost the same, the Gate Pulse Delay of DDG (Digital Delay Generator) in the ICCD started at 52ns and ended at 82ns with a width (FWHM) of 10 ns. It appears that the peak location and lifetime of fluorescence for different crude oil samples varied with their densities, and those with similar densities shared a similar lifespan with the closer peak locations of fluorescence. It is also observed that the peak of fluorescence remained the same location before reaching the maximum intensity, subsequently shift to longer wavelength as fluorescence attenuated from maximum intensity with a red shift among 17-30 nm varied with samples. This demonstrated that the decay rate of fluorescent components in the crude oils was different, and energy transfer between these components might exist. It is hoped that those obtained results and characteristics could be the useful information for identification of suspended spilled-oil underwater.
More Related Videos
11:20In Situ Visualization of the Phase Behavior of Oil Samples Under Refinery Process Conditions
Published on: February 21, 2017
06:08Time-resolved Photophysical Characterization of Triplet-harvesting Organic Compounds at an Oxygen-free Environment Using an iCCD Camera
Published on: December 27, 2018