Related Experiment Video
Updated: Mar 29, 2026

Quantitative Analysis of Vacuum Induction Melting by Laser-induced Breakdown Spectroscopy
Published on: June 10, 2019
[Quantitative Analysis of Mn in Soil Samples Using LIBS]
Abstract:
The trace element of Manganese element in the agricultural farm (Anhui Huaiyuan Nongkang) soil was quantitatively analyzed by Laser-induced breakdown spectroscopy. The line of 403.1 nm was selected as the analysis line of Mn. The matrix element of Fe in soil was chosen as the internal calibration element and the analysis line was 407.2 nm. Ten soil samples were used to construct calibration curves with traditional method and internal standard method, and four soil samples were selected as test samples. The experimental results showed that the fitting correlation coefficient (r) is 0.954 when using the traditional method, the maximum relative error of the measurement samples is 5.72%, and the detection limit of Mn in soil is 93 mg x kg(-1). While using the internal standard method to construct the calibration curve, the fitting correlation coefficient (r) is 0.983, the relative error of measurement samples is reduced to 4.1%, and the detection limit of Mn in soil is 71 mg x kg(-1). The result indicates that LIBS technique can be used to detect trace element Mn in soil. In a certain extent, the internal standard method can improve the accuracy of measurement.
More Related Videos
08:53Dependence of Laser-induced Breakdown Spectroscopy Results on Pulse Energies and Timing Parameters Using Soil Simulants
Published on: September 23, 2013
10:17Laser-induced Breakdown Spectroscopy: A New Approach for Nanoparticle's Mapping and Quantification in Organ Tissue
Published on: June 18, 2014
Related Concept Videos
Matrix-Assisted Laser Desorption Ionization (MALDI)
Atomic Emission Spectroscopy: Overview
MALDI-TOF Mass Spectrometry
Atomic Absorption Spectroscopy: Lab
Solutions containing organic solvents, such as low-molecular-mass alcohols, esters, or ketones, enhance absorbances by increasing...