Related Experiment Video
Updated: Mar 29, 2026

Surfactant Depletion Combined with Injurious Ventilation Results in a Reproducible Model of the Acute Respiratory Distress Syndrome ARDS
Published on: April 7, 2021
End-Expiratory Volume and Oxygenation: Targeting PEEP in ARDS Patients
Brian Casserly1,2, F Dennis McCool3, Jean Saunders4
1Pulmonary, Critical Care, and Sleep Medicine, Mid-Western Regional Hospital, Dooradoyle, Limerick, Ireland. brian_casserly@brown.edu.
Introduction:
Changes in end-expiratory lung volume (∆EELV) in response to changes in PEEP (∆PEEP) have not been reported in mechanically ventilated patients with ARDS. The purpose of this study was to determine the utility of measurements of ∆EELV in determining optimal PEEP in ARDS patients.
Methods:
Nine patients with ARDS were prospectively recruited. ∆EELV was measured using magnetometers during serial decremental PEEP trials. Changes in PaO2 (∆PaO2) were simultaneously measured. Static respiratory system compliance (CRS), ∆PaO2/∆PEEP, and ∆EELV/∆PEEP were calculated at each level of PEEP.
Results:
For the group, ∆EELV decreased by 1.09 ± 0.13 L (mean ± SD) as PEEP was reduced from 20 to 0 cm H2O with the greatest changes in ∆EELV occurring over the mid range of the decremental PEEP curve. Optimal values for CRS, ∆EELV/∆PEEP, and ∆PaO2/∆PEEP could be identified for each patient and occurred at PEEP levels ranging from 10 to 17.5 cm H2O. There was a significant correlation (r = 0.712, p = 0.047) between ∆PaO2/∆PEEP and ∆EELV/∆PEEP.
Conclusions:
∆EELV can be measured from a decremental PEEP curve. Since ∆EELV is highly correlated with ∆PaO2, measures of ∆PaO2/∆PEEP may provide a surrogate for measures of ∆EELV/∆PEEP. Combining measures of ∆EELV/∆PEEP with measures of CRS may provide a novel means of determining optimal PEEP in patients with ARDS.
More Related Videos
Related Concept Videos
Acute Respiratory Failure-V
Ensure that patients are monitored continuously for their response to therapy, including changes in...
Mechanical Ventilation I: Indication and Settings
Mechanical Ventilation II: Invasive Ventilation
Negative-Pressure Ventilators
Negative-pressure ventilators create a vacuum around the chest or body to draw air into the lungs, simulating breathing. This method does not require an...
Mechanical Ventilation III: Noninvasive Ventilation
Noninvasive Positive-Pressure Ventilation...
Acute Respiratory Failure-IV
Ventilatory Modes
There are three ventilatory modes: full support, partial support, and spontaneous. These are described below.
Full Support Modes
Full support modes include controlled mechanical ventilation, continuous mandatory...

