Related Experiment Video
Updated: Mar 28, 2026

Calcium Carbonate Formation in the Presence of Biopolymeric Additives
Published on: May 14, 2019
Optimizing Calcium Phosphates by the Control of pH and Temperature via Wet Precipitation
Abstract:
A series of calcium phosphates synthesized through a wet precipitation route of hydroxylapatite (HAP) was investigated over a wide range of temperature and pH (25-80 degrees C, and pH 6.5-10.0) using a combination of microscopic and spectroscopic analyses. XRD and FTIR show that monetite and brushite are formed as a single phase at non-ideal conditions of HAP, respectively. From TGA results, it is found that brushite is converted to monetite at a range 175-200 degrees C when heated at the heating rate, 10 degrees C/min. This phase transformation is also observed when brushite is aged at pH 8.5 and 60 degrees C for 24 hr in solution. Morphology of brushite is sensitive to pH variation. At pH 6.5, tabular and platy crystals of brushite are observed whereas needle-like ones are predominant at pH 8.5. For HAP formed at pH 10.0, their shapes tend toward needle-like particles as temperature increases. HAP particles at pH 8.5 are very similar in morphology to HAP at pH 10.0, but their lengths are two or three times as great as those at pH 10.0. These observations demonstrate that desired phase and properties of calcium phosphates can be controlled by pH, temperature, and aging time through a wet precipitation method.
Related Concept Videos
Factors Affecting Solubility
Washing, Drying, and Ignition of Precipitates
Precipitation Processes
Colloidal precipitates
Precipitate Formation and Particle Size Control
The obtained precipitate should be either a pure substance of known composition or easily converted to one by a simple process, such as ignition or drying. In addition, the precipitate should be insoluble and easily filterable. In general, filterability...

