Ultrasonic probing of cohesive granular media at very low consolidation
Francisco Ruiz Botello1, Antonio Castellanos1, Vincent Tournat2
1Faculty of Physics, University of Seville, Avda. Reina Mercedes s/n, 41012 Seville, Spain.
Abstract:
In this work, we study sound propagation in different granular media made of magnetite particles, steel particles, and glass beads consolidated under their own weight. We used two ultrasonic non invasive methods, which are found in good agreement, to estimate the longitudinal wave velocity Vp. In the first one, the velocity is determined through the resonance peaks of the powder slab. The second method determines the velocity with the time of flight of a short pulse traveling through the medium. Magnetite and steel samples show dispersive properties below a frequency ∼ 10kHz. The increase of attractive forces between particles lead to two competing effects; on one hand the solid fraction decreases and on the other hand the contacts are stiffer. A decrease in solid fraction implies that the number of contacts decreases leading to a decrease in the wave propagation velocity. On the other hand stronger contacts on average lead to an increase of sound velocity. In our experiments an increase in powder cohesion (caused by a decrease of the bead diameter) leads to an increase in sound velocity even though the solid fraction decreases. The same behavior is found in glass beads. These results show the predominant role of cohesive forces on sound propagation in loosely consolidated dry fine powders as well as the accuracy of ultrasonic methods for powder characterization.
More Related Videos
Related Concept Videos
Specific Gravity of Aggregate
Bulk or gross specific gravity is calculated by taking the ratio of the mass of aggregates in the saturated surface-dry state to the total volume that includes both the solids and the voids within the...
Moisture Content and Bulking of Aggregate
When aggregates are exposed to rain or sit in stockpiles, they absorb moisture, which must be...


