Preparation and characterization of TiO2/silicate hierarchical coating on titanium surface for biomedical...

In the current work, TiO2/silicate hierarchical coatings with various nanostructure morphologies were successfully prepared on titanium substrates through micro-arc oxidation (MAO) and subsequent hydrothermal treatment (HT). Moreover, the nucleation mechanism and growth behavior of the nanostructures, hydrophilicity, protein adsorption and apatite-inducing ability of various coatings were also explored. The novel TiO2/silicate hierarchical coatings comprised calcium silicate hydrate (CSH) as an outer-layer and TiO2 matrix as an inner-layer. According to the morphological features, the nanostructures were classified as nanorod, nanoplate and nanoleaf. The morphology, degree of crystallinity and crystalline phases of CSH nanostructures could be controlled by optimizing the HT conditions. The nucleation of CSH nanostructures is caused by release and re-precipitation mechanism. The TiO2/CSH hierarchical coatings exhibited some enhanced physical and biological performances compared to MAO-fabricated coating. The improvement of the hydrophilicity, fibronectin adsorption and apatite-inducing ability was found to be morphological dependent according to the following trend: nanoleaf coating>nanoplate coating>nanorod coating>MAO coating. The results indicate that the tuning of physical and morphological properties of nanostructures coated on biomaterial surface could significantly influence the hydrophilicity, protein adsorption and in vitro bioactivity of biomaterial.