Related Experiment Video

Updated: Mar 27, 2026

Waste Water Derived Electroactive Microbial Biofilms: Growth, Maintenance, and Basic Characterization
11:58

Waste Water Derived Electroactive Microbial Biofilms: Growth, Maintenance, and Basic Characterization

Published on: December 29, 2013

14.3K

Understanding energy loss in parallelly connected microbial fuel cells: Non-Faradaic current

Junyeong An1, Junyoung Sim1, Yujie Feng2

  • 1Department of Civil and Environmental Engineering, University of Waterloo, 200 University Avenue West, Waterloo, ON N2L3G1, Canada.

Bioresource Technology
|January 9, 2016
PubMed

Keywords:
Energy lossMicrobial fuel cellParallel connectionSeries connection

More Related Videos

Self-standing Electrochemical Set-up to Enrich Anode-respiring Bacteria On-site05:29

Self-standing Electrochemical Set-up to Enrich Anode-respiring Bacteria On-site

Published on: July 24, 2018

8.2K
Electrochemically and Bioelectrochemically Induced Ammonium Recovery09:50

Electrochemically and Bioelectrochemically Induced Ammonium Recovery

Published on: January 22, 2015

13.3K

Related Concept Videos

Voltammetry: Factors Affecting Measurements01:21

Voltammetry: Factors Affecting Measurements

A current produced due to the redox reactions of the analyte at the working and auxiliary electrodes is called a faradaic current. The reaction can be divided into two types. The current generated due to the reduction of the analyte is called cathodic current, and it carries a positive charge. In contrast, the current produced by analyte oxidation is known as an anodic current, and it has a negative charge. The applied potential at the working electrode determines the faradaic current flow, and...
699
Batteries and Fuel Cells03:12

Batteries and Fuel Cells

A battery is a galvanic cell that is used as a source of electrical power for specific applications. Modern batteries exist in a multitude of forms to accommodate various applications, from tiny button batteries such as those that power wristwatches to the very large batteries used to supply backup energy to municipal power grids. Some batteries are designed for single-use applications and cannot be recharged (primary cells), while others are based on conveniently reversible cell reactions that...
31.9K
Voltaic/Galvanic Cells02:47

Voltaic/Galvanic Cells

Spontaneous Chemical Reactions
Spontaneous redox reactions occur abundantly in nature. The chemical reaction occurring in a disposable AA battery powering our remote controls is one such example of a spontaneous redox reaction. Another example is the immersion of coiled copper wire into an aqueous silver nitrate solution. The reaction shows a gradual, visually impressive color change from colorless to bright blue and the formation of a grey precipitate on the copper wire. In this experiment,...
68.2K
Energy Losses in Transformers01:21

Energy Losses in Transformers

In an ideal transformer, it is assumed that there are no energy losses, and, hence, all the power at the primary winding is transferred to the secondary winding. However, in reality,  the transformers always have some energy losses, and, hence, the output power obtained at the secondary winding is less than the input power at the primary winding due to energy losses.
There are four main reasons for energy losses in transformers.
The first cause can be  the high resistance of the...
1.5K
Resistors In Parallel01:23

Resistors In Parallel

Resistors are in parallel when one end of all the resistors are connected to a continuous wire of negligible resistance and the other end of all the resistors are also connected to one another through a continuous wire of negligible resistance. In the case of a parallel configuration, the potential drop across each resistor is the same. Current through each resistor can be found using Ohm’s law, I = V/R, where the voltage is constant across each resistor. The sum of the individual currents...
7.1K
Electrochemical Cells01:28

Electrochemical Cells

Electrochemical cells are systems that convert chemical energy into electrical energy or use electrical energy to drive chemical reactions. They consist of two electrodes in contact with an electrolyte, where redox reactions enable electron transfer. Most electrochemical cells include two half-cells connected by an external wire for electron flow and a salt bridge for ion flow. The salt bridge contains an electrolyte solution and maintains charge neutrality by allowing ions—not...
138