An understanding of potential and limitations of alginate/PLL microcapsules as a cell retention system for perfusion...

Microcapsules for high cell density culture of mammalian cells have found an increasing interest, however, the poor stability of the microcapsules and the lack of characterisation methods led to few quantitative results. Alginate-poly-L-lysine (PLL) microcapsules have been studied in detail in order to form a basis for comparison of capsules made from different polymers. Since the microcapsules can be easily retained in the bioreactor without the need for a cell separation device, high cell densities were achieved with a maximum of 4 × 10(7) cell/ml(microcapsules), corresponding to a colonisation of 5% of the internal capsule volume. Measurement of microcapsule integrity and mechanical resistance showed that alginate-PLL microcapsules are not suitable for perfusion cultures since they are very sensitive to media composition, mainly the presence of non-gelling ions that have a higher affinity for alginate than PLL and Ca(2+), leading to the leakage of PLL and Ca(2+), and to microcapsule rupture.