Related Experiment Video
Updated: Mar 26, 2026

Electric-field Control of Electronic States in WS2 Nanodevices by Electrolyte Gating
Published on: April 12, 2018
Mechanisms of current fluctuation in ambipolar black phosphorus field-effect transistors
Xuefei Li1, Yuchen Du, Mengwei Si
1Wuhan National High Magnetic Field Center and School of Electrical and Electronic Engineering, Huazhong University of Science and Technology, Wuhan 430074, China. yqwu@mail.hust.edu.cn.
Abstract:
Multi-layer black phosphorus has emerged as a strong candidate owing to its high carrier mobility with most of the previous research work focused on its p-type properties. Very few studies have been performed on its n-type electronic characteristics which are important not only for the complementary operation for logic, but also crucial for understanding the carrier transport through the metal-black phosphorus junction. A thorough understanding and proper evaluation of the performance potential of both p- and n-types are highly desirable. In this paper, we investigate the temperature dependent ambipolar operation of both electron and hole transport from 300 K to 20 K. On-currents as high as 85 μA μm(-1) for a 0.2 μm channel length BP nFET at 300 K are observed. Moreover, we provide the first systematic study on the low frequency noise mechanisms for both n-channel and p-channel BP transistors. The dominated noise mechanisms of the multi-layer BP nFET and pFET are mobility fluctuation and carrier number fluctuations with correlated mobility fluctuations, respectively. We have also established a baseline of the low electrical noise of 8.1 × 10(-9)μm(2) Hz(-1) at 10 Hz at room temperature for BP pFETs, which is 3 times improvement over previous reports, and 7.0 × 10(-8)μm(2) Hz(-1) for BP nFETs for the first time.
Related Concept Videos
Switching of BJT
Cut-off Mode ("Off" State): In this state, both the emitter-base and collector-base junctions are...
Bipolar Junction Transistor
Characteristics of MOSFET
Various vital parameters influence their functionality, which is crucial for theory and electronics applications. First, channel dimensions, precisely length, and width, are pivotal. The size of these channels affects the transistor's ability to carry current and switching speeds; shorter channels typically enable...
Working Principle of BJT
In the PNP configuration, the emitter is heavily doped with positive charge carriers (holes), while the base is lightly doped with negative carriers (electrons). This setup allows for a forward bias across the emitter-base junction,...
P-N junction
Biasing of P-N Junction
In equilibrium, no external voltage is applied across the p-n junction. The depletion region is formed at the junction interface due to the diffusion of carriers, which leaves behind charged dopants, acceptors on the p-side, and donors on the n-side. These immobile charges create an electric field that prevents further diffusion of carriers. The related energy band...

