Related Experiment Video
Updated: Mar 26, 2026

Determination of Inorganic Arsenic in a Wide Range of Food Matrices using Hydride Generation - Atomic Absorption Spectrometry.
Published on: September 1, 2017
Inorganic arsenic speciation in natural mineral drinking waters by flow-through anodic stripping chronopotentiometry
Dominika Jedryczko1, Pawel Pohl1, Maja Welna1
1Wroclaw University of Technology, Faculty of Chemistry, Department of Analytical Chemistry and Chemical Metallurgy, Wybrzeze Stanislawa Wyspianskiego 27, 50-370 Wroclaw, Poland.
Abstract:
A simple and inexpensive method for chemical speciation of inorganic As in natural mineral drinking waters by using anodic stripping chronopotentiometry (ASCP) in an electrochemical flow-through cell with an Au wire as the working electrode was described in the present work. The presented method is an attractive alternative to laborious and time-consuming procedures requiring pre-separation of various forms of As before their detection by other flow-through and non flow-through stripping methods. The limits of detection were found to be 0.42 µg L(-1) for As(III) and 0.55 µg L(-1) for As(V), obtained at the deposition potentials of -350 mV and -1600 mV, respectively. The accuracy of the method was assessed by the spiking-and-recovery experiments for particular water samples and the recoveries found, being in range from 99% to 105% for As(III) and from 104% to 106% for As(V), respectively, were quantitative. The proposed method was successfully applied to speciation analysis of inorganic As in water samples with a high content of Cu.
More Related Videos
08:01Removal of Arsenic Using a Cationic Polymer Gel Impregnated with Iron Hydroxide
Published on: June 28, 2019
09:51TD-DFT Guided Advanced E-Eye Sensing Technique for On-site Quantification of Fe, Cr, F, and As in the Environmental, Biological, and Food Samples
Published on: September 19, 2025
Related Concept Videos
Precipitation and Co-precipitation
Voltammetry: Stripping Methods
Anodic Stripping Voltammetry (ASV)
ASV is used to determine metals and metalloids at trace levels. It involves two steps: deposition and stripping. First, a negative potential is applied to the...
Atomic Absorption Spectroscopy: Lab
Solutions containing organic solvents, such as low-molecular-mass alcohols, esters, or ketones, enhance absorbances by increasing...
Acid Mine Drainage
Atomic Emission Spectroscopy: Interference