Cotransport of graphene oxide and Cu(II) through saturated porous media

This study examines the cotransport of graphene oxide (GO) and Cu in porous media. The impacts of GO concentration and ion strength (IS) on Cu transport in laboratory packed columns were investigated. The results indicated that GO had fairly high mobility at a IS of 1mM, and could serve as an effective carrier of Cu(II). The facilitated transport was found to increase with increasing concentration of GO (CGO). The peak effluent concentration (C/C0)max of Cu was 0.57 at CGO of 120mg/L and IS=1mM and 0.13 at 40mg/L and IS=1mM. The Cu appears to be irreversibly adsorbed by the sand because no Cu appeared in the effluent in the absence of GO. However, the GO-facilitated Cu transport was reduced as the IS increased from 1 to 1000mM. In fact, the facilitated transport was zero percent at an IS of 1000mM. Particle size analysis, Zeta potential measurements and DLVO calculations demonstrated that higher IS values made the GO became unstable and it flocculated and attached to the sand. We also fed GO into the column pre-equilibrated by Cu as sequential elution experiments and found that the later introduced GO can complex the pre-adsorbed Cu from the sand surface because GO has a higher adsorption affinity for Cu. An advection-dispersion-retention numerical model was able to describe the Cu and GO transport in the column. Our work provides useful insights into fate, transport and risk assessment of heavy metal contaminants in the presence of engineered nanoparticles.