Related Experiment Video
Updated: Mar 26, 2026

Measurement of Spatial Stability in Precision Grip
Published on: June 4, 2020
Analysis of terrain effects on the interfacial force distribution at the hand and forearm during crutch gait
Emma Rogers1, Matthew J Leineweber2, Jan Andrysek2,3
1a Institute of Biomaterials and Biomedical Engineering , University of Toronto , Toronto , Ontario , Canada.
Abstract:
Forces transferred to the upper body during crutch use can lead to both short-term and long-term injuries, including joint pain, crutch palsy, and over-use injuries. While this force transmission has been studied in controlled laboratory settings, it is unclear how these forces are affected by irregular terrains commonly encountered during community ambulation. The purpose of this study was to determine the effects of walking speed and uneven terrain on the load magnitude, distribution, and rate of loading at the human-crutch contact surfaces. Our results show that the rates of loading were significantly increased with higher walking speeds and while negotiating certain irregular terrains, despite there being no apparent effect on the peak force transmission, suggesting load rate may be a more appropriate metric for assessing terrain effects on crutch gait. Furthermore, irrespective of the type of terrain and walking condition, the largest compressive forces were found to reside in the carpal-tunnel region of the hand, and may therefore be a primary contributor to carpal-tunnel injury.
More Related Videos
05:52Lower-Limb Biomechanical Characteristics Associated with Unplanned Gait Termination Under Different Walking Speeds
Published on: August 25, 2020
06:35Using Gold-standard Gait Analysis Methods to Assess Experience Effects on Lower-limb Mechanics During Moderate High-heeled Jogging and Running
Published on: September 14, 2017
Related Concept Videos
Static and Kinetic Frictional Force
However, if two systems are in contact and are stationary relative to one...
Dry Friction
To illustrate this concept, imagine a wooden crate resting on a rough, non-uniform horizontal surface. When an external force is applied to...
Characteristics of Dry Friction
Before the wheelbarrow starts moving, the static frictional force acts tangentially to the contact surface, opposing the force that is about to induce the motion. This frictional force prevents the...
Frictional Forces on Flat Belts
Frictional Force
Types of Friction Problems
The first type of dry friction problem involves situations where there is no apparent impending motion....