Related Experiment Video
Updated: Mar 25, 2026

Sputter Growth and Characterization of Metamagnetic B2-ordered FeRh Epilayers
Published on: October 5, 2013
Study of the magnetite to maghemite transition using microwave permittivity and permeability measurements
Jerome Alexander Cuenca1, Keith Bugler, Stuart Taylor
1Cardiff Wolfson Centre for Magnetics, School of Engineering, Cardiff University, Cardiff, CF24 3AA, UK.
Abstract:
The microwave cavity perturbation (MCP) technique is used to identify the transition from magnetite (Fe3O4) to the meta-stable form of maghemite (γ-Fe2O3). In this study Fe3O4 was annealed at temperatures from 60 to 300 °C to vary the oxidation. Subsequent to annealing, the complex permittivity and magnetic permeability of the iron oxide powders were measured. The transition to γ-Fe2O3 was corroborated with x-ray diffraction (XRD), x-ray photoelectron spectroscopy (XPS) and vibrating sample magnetometry (VSM). XRD, XPS and VSM implied that the starting powder was consistent with Fe3O4 and the powders annealed at more than 200 °C were transitioning to γ-Fe2O3. The MCP measurements gave large differences in both complex permittivity and magnetic permeability of the two phases in the frequency range of 2.5-10.2 GHz. Magnetic permeability decreased with annealing temperature, though magnetic losses showed frequency dependent behaviour. Complex permittivity measurements showed a large decrease in both dielectric constant and losses at all measurement frequencies, as well as a prominent loss peak centred around the phase transition temperatures. We interpret the loss peak as being a consequence of field effects due to an intermediate multi-phase mixture. Additionally, almost no frequency dependence was observed. The reduction in complex permittivity implies that the Feoct(2+) cations in the lattice provide a significant contribution to polarization at microwave frequencies and the effects of Feoct(3+) are nominal in comparison.. The change in loss can be explained as a combination of the differences in the effective conductivity of the two phases (i.e. Fe3O4 exhibits electron-hopping conduction whereas the presence of vacancies in γ-Fe2O3 nullifies this). This shows that the non-invasive MCP measurements serve as a highly sensitive and versatile method for looking at this phase transition in iron and potentially the effects of oxidation states on the polarization in other iron oxides.
Related Concept Videos
Magnetic Susceptibility and Permeability
When diamagnetic materials are placed under an external magnetic field, the moments opposite to the field are induced. Hence, the susceptibility for diamagnets has a minimal negative value of 10-5–10-6. Since...
Magnetostatic Boundary Conditions
Paramagnetism
Ferromagnetism
Diamagnetism
Diamagnetism was discovered by Anton Brugmans in 1778 when he observed that bismuth gets repelled by magnetic fields, thus theorizing that diamagnets get repelled by magnets....
Susceptibility, Permittivity and Dielectric Constant

