Label-free electrochemical lead (II) aptasensor using thionine as the signaling molecule and graphene as...

A label-free and highly sensitive electrochemical aptasensor for Pb(2+) was constructed using thionine (TH) as the signaling molecule and graphene (GR) as the signal-enhancing platform. The electrochemical sensing interface was fabricated by stepwise assembly of GR and TH on the lead (II) specific aptamer (LSA) modified electrode. Upon interaction with Pb(2+), the aptamer probe on the sensor underwent conformational switch from a single-stranded DNA form to the G-quadruplex structure, causing the GR with assembled TH released from the electrode surface into solution. As a result, the electrochemical signal of TH on the aptasensor was substantially reduced. Under the optimal experimental conditions, the attenuation of peak currents presented a good linear relationship with the logarithm of Pb(2+) concentrations over the range from 1.6×10(-13) to 1.6×10(-10)M. The detection limit was estimated to be 3.2×10(-14)M. The aptasensor also exhibited good regenerability, excellent selectivity, and acceptable reproducibility, indicating promising application in environment monitoring of lead.