Encapsulation of CO2 into amorphous alpha-cyclodextrin powder at different moisture contents - Part 1: Encapsulation...

This study investigated the effects of water-induced crystallization of amorphous alpha-cyclodextrin (α-CD) powder on CO2 encapsulation at 0.4-1.6 MPa pressure for 1-72 h through the addition of water (to reach to 13, 15 and 17% wet basis, w.b.) into amorphous α-CD powder prior to the encapsulation. The results showed that the α-CD encapsulation capacity was over 1 mol CO2/mol α-CD after pressurizing for longer than 48 h. The encapsulated CO2 concentration by the addition of water was considerably higher (p<0.05) than that of amorphous α-CD powder (5.51% MC, w.b.) without an addition of water and that of crystalline α-CD powders under the same MC and encapsulation conditions. A comparison of CO2 release properties (75% relative humidity, 25 °C) from complexed powders prepared from amorphous and crystalline α-CD powders under the same conditions is also presented.