Related Experiment Video
Updated: Mar 24, 2026

Focused Ion Beam Fabrication of LiPON-based Solid-state Lithium-ion Nanobatteries for In Situ Testing
Published on: March 7, 2018
Electrical Characterization of Ultrathin RF-Sputtered LiPON Layers for Nanoscale Batteries
Brecht Put1,2, Philippe M Vereecken1,3, Johan Meersschaut1
1Imec , Kapeldreef 75, 3001 Leuven, Belgium.
Abstract:
Ultrathin lithium phosphorus oxynitride glass (LiPON) films with thicknesses down to 15 nm, deposited by reactive sputtering in nitrogen plasma, were found to be electronically insulating. Such ultrathin electrolyte layers could lead to high power outputs and increased battery energy densities. The effects of stoichiometry, film thickness, and substrate material on the ionic conductivity were investigated. As the amount of nitrogen in the layers increased, the activation energy of the ionic conductivity decreased from 0.63 to 0.53 eV, leading to a maximum conductivity of 1 × 10(-6) S/cm. No dependence of the ionic conductivity on the film thickness or substrate material could be established. A detailed analysis of the equivalent circuit model used to fit the impedance data is provided. Polarization measurements were performed to determine the electronic leakage in these ultrathin films. A 15-nm LiPON layer on a TiN substrate showed electronically insulating properties with electronic resistivity values around 10(15) Ω·cm. To our knowledge, this is the thinnest RF-sputtered LiPON layer shown to be electronically insulating while retaining good ionic conductivity.
More Related Videos
07:20Screening of Coatings for an All-Solid-State Battery Using In Situ Transmission Electron Microscopy
Published on: January 20, 2023
08:12Ohmic Contact Fabrication Using a Focused-ion Beam Technique and Electrical Characterization for Layer Semiconductor Nanostructures
Published on: December 5, 2015