Chromate removal by surface-modified nanoscale zero-valent iron: Effect of different surface coatings and water...

This study investigated the correlation between the colloidal stability and reactivity of surface-modified nano zero-valent iron (SM-nZVI) as affected by the surface coating (i.e., polyacrylic acid [PAA] and starch) under various geochemical conditions. Generally, the colloidal stability of nZVI was enhanced with increasing loading of surface coating, while there is an optimum loading for the most efficient Cr(VI) removal by SM-nZVI. At lower loadings than the optimum loading, the surface coating could enhance the particle stabilization, facilitating the Cr(VI) reduction by providing more available surface sites. However, the over-loaded surface coating on the surface of nZVI particles decreased the Cr(VI) reduction due to the occupation of the reactive sites and the inhibition of the mass transfer of Cr(VI) ions from water to the particle surface by providing the electrostatic or steric repulsion. The effects of Ca(2+) ions or humic acid (HA) on the colloidal stability and reactivity of PAA-modified nZVI (P-nZVI) and starch-modified nZVI (S-nZVI) were examined. Differing stability behavior and reactivity were observed for different SM-nZVI. It was found that the presence of Ca(2+) or HA altered surface chemistry of SM-nZVI, the particle-particle interaction and the particle-contaminant interaction, and hence influencing the stability behavior and reactivity of the particles.