Related Experiment Video
Updated: Mar 24, 2026

In-situ Tapering of Chalcogenide Fiber for Mid-infrared Supercontinuum Generation
Published on: May 27, 2013
Highly stable, monolithic, single-mode mid-infrared supercontinuum source based on low-loss fusion spliced silica and
Abstract:
A 0.8 to 4.5 μm highly stable all-fiber spliced mid-infrared supercontinuum (SC) source was presented. The joint between the single-mode (SM) pump silica fiber and the ZBLAN fiber (ZrF4 - BaF2 - LaF3 - AlF3 - NaF, a type of fluoride fiber) was fusion spliced, which greatly improved the SC's stability. The low-loss splicing was guaranteed by the similar mode field areas of the fundamental mode LP(01) of the silica and ZBLAN fibers. At the splicing joint the ZBLAN fiber enveloped the silica fiber, thus increasing the robustness of the splice. A low splicing loss of less than 0.1 dB was calculated, which ensured that the whole SC source was very reliable. The SC had a maximal average power of 550.8 mW with a 1.5 dB spectral bandwidth ranging from 2642 to 4065 nm. In particular, the SC power for λ>3.8 μm was measured to be 116.1 mW with a power ratio of ∼21.1% of the total SC power. Perfect Gaussian beam profiles of the SC source demonstrated its SM operation. Over 12 h of continuous operation of this SC source showed its outstanding power stability with a root mean square variation of 0.59%, which also demonstrated the high quality of the fusion spliced joint.
More Related Videos
12:21Stimulated Stokes and Antistokes Raman Scattering in Microspherical Whispering Gallery Mode Resonators
Published on: April 4, 2016
08:48Low-cost Custom Fabrication and Mode-locked Operation of an All-normal-dispersion Femtosecond Fiber Laser for Multiphoton Microscopy
Published on: November 22, 2019