Related Experiment Video
Updated: Mar 23, 2026

Synthetic, Multi-Layer, Self-Oscillating Vocal Fold Model Fabrication
Published on: December 2, 2011
Modeling the voice source in terms of spectral slopes
Marc Garellek1, Robin Samlan2, Bruce R Gerratt3
1Department of Linguistics, University of California, San Diego, 9500 Gilman Drive #0108, La Jolla, California 92023-0108, USA.
Abstract:
A psychoacoustic model of the voice source spectrum is proposed. The model is characterized by four spectral slope parameters: the difference in amplitude between the first two harmonics (H1-H2), the second and fourth harmonics (H2-H4), the fourth harmonic and the harmonic nearest 2 kHz in frequency (H4-2 kHz), and the harmonic nearest 2 kHz and that nearest 5 kHz (2 kHz-5 kHz). As a step toward model validation, experiments were conducted to establish the acoustic and perceptual independence of these parameters. In experiment 1, the model was fit to a large number of voice sources. Results showed that parameters are predictable from one another, but that these relationships are due to overall spectral roll-off. Two additional experiments addressed the perceptual independence of the source parameters. Listener sensitivity to H1-H2, H2-H4, and H4-2 kHz did not change as a function of the slope of an adjacent component, suggesting that sensitivity to these components is robust. Listener sensitivity to changes in spectral slope from 2 kHz to 5 kHz depended on complex interactions between spectral slope, spectral noise levels, and H4-2 kHz. It is concluded that the four parameters represent non-redundant acoustic and perceptual aspects of voice quality.
Related Concept Videos
Sinusoidal Sources
In homes, the power supplies use sinusoidal sources to provide electricity. These sources generate a voltage that varies sinusoidally...
Modeling and Similitude
Calibration Curves: Linear Least Squares
For data that follow a straight line, the standard method for fitting is the linear...
Linear Approximation in Frequency Domain
In contrast, nonlinear systems do not inherently possess these properties. However, for small deviations around an operating point, a nonlinear system can often be approximated as linear....
IR Spectrum Peak Splitting: Symmetric vs Asymmetric Vibrations
Graphical and Analytic Representation of Sinusoids
The first step is measuring the peak-to-peak value, which is twice the amplitude of the sinusoid. This provides information about the maximum voltage swing of the waveform.
Secondly, the period and angular frequency are determined. The period is the time taken for one complete cycle of the waveform, while...

