Exploring the pressure resistance limits of monolithic silica capillary columns

We report on an experimental approach to measure the pressure stability and mechanical strength of monolithic silica capillary columns with different diameters (50 and 100μm i.d.) and considering two different domain sizes, typical for the second generation monoliths or smaller. The approach consists of exposing the capillaries to ultra-high pressures (gradually stepwise increased from 20 to 80MPa), with intermediate measurements of the column efficiency, permeability and retention factors to check the mechanical stability of the bed. It was observed that all tested columns withstood the imposed pressure stress, i.e., all the tested parameters remained unaffected up till the maximal test pressure of 80MPa. The applied pressure gradient corresponded to 320MPa/m. The two 100μm i.d.-capillary columns were also exposed to pressures between 80 and 90MPa for a prolonged time (8h), and this did not cause any damage either.