Preparation of Polypropylene Spin Tips Filled with Immobilized Titanium(IV) Ion Monolithic Adsorbent for Robust...

In this study, we developed a Ti(IV) monolithic spin tip for phosphoproteome analysis of a minute amount of biological sample for the first time. The surface of polypropylene pipet tip was activated by the photoinitiator benzophenone under UV light radiation followed by polymerization of ethylene glycol methacrylate phosphate and bis-acrylamide in the tip to form a porous monolith with reactive phosphate groups. The as-prepared tips grafted with monolithic adsorbent were then chelated with titanium(IV) ion for phosphopeptide enrichment. It was found that the tips enabled fast and efficient capture of phosphopeptides from microscale complex samples. The monolithic tip was demonstrated to have a detection limit as low as 5 fmol β-casein tryptic digest, along with an exceptionally high specificity to capture phosphopeptides from complex tryptic digest mixed with an unphosphorylated protein and a phosphorylated protein at a molar ratio up to 1000:1. When the tip was applied to enrich phosphopeptides from 5 μg of tryptic digest of complex HeLa cell proteins, 1185 high confidence of phosphorylated sites were successfully identified with the specificity as high as 92.5%. So far, this is the most sensitive phosphoproteomics analysis using a standard liquid chromatography-tandem mass spectrometry (LC-MS/MS) system for proteome-wide phosphorylation analysis in mammalian cells.