Ageing of radiation-sterilized polypropylene: changes in semicrystallinity
Related Experiment Video
Updated: Oct 2, 2026

Artificial Thermal Ageing of Polyester Reinforced and Polyvinyl Chloride Coated Technical Fabric
Published on: January 29, 2020
M Jayabalan1, P D Nair, K Sreenivasan
1Division for Technical Evaluation of Biomaterials, Sree Chitra Tirunal Institute for Medical Sciences and Technology, Trivandrum, India.
Abstract:
Studies on radiation sterilization of isotactic polypropylene intended for biomedical applications were carried out for uncovered and covered samples. The effect of ageing on these samples was studied by determining the changes in relative crystallinity. The semicrystalline nature of the polymer is responsible for the changes in crystallinity. The transitions between short- and long-range order and short- and long-duration stiffness in both covered and uncovered samples, reflected in changes in relative crystallinity, were highly affected by the formation of branches in the backbone of the polymer. The high degree of branching in covered samples resulted in greater long-duration stiffness in the transition between short- and long-duration stiffness. The high degree of branching in covered samples was attributed to the high diffusion of energized oxygen into the polymer matrix compared with uncovered samples. The changes in relative crystallinity were rapid in uncovered samples (70% max; 34% min) but rather slow in covered samples (87% max; 43% min).
Related Concept Videos
Polymer Classification: Architecture
Polymer Classification: Crystallinity
Crystalline domains are the regions where polymer chains are aligned in an orderly manner and held together in proximity by intermolecular forces. For example, chains in the crystalline domains of polyethylene and nylon are bound together by van der Waals...
Polymer Classification: Stereospecificity
Molecular Weight of Step-Growth Polymers
As the step-growth polymerization involves step-wise condensation of monomers, the molecular weight also builds up eventually. Consequently, high molecular weight polymers are obtained at the late stages of the polymerization, where 99% of monomers have been consumed.
The extent of the...
Types of Step-Growth Polymers: Polyesters
Polyesters are commonly prepared from terephthalic acid and ethylene glycol; the crude product is known as poly(ethylene terephthalate) or PET. However, polyesters are synthesized industrially by transesterification of dimethyl terephthalate with ethylene glycol at 150 °C. The two reactants and the polymer...
Classification and Mechanical Properties of Synthetic Polymers

