Life-Cycle Assessment of Oilseeds for Biojet Production Using Localized Cold-Press Extraction

As nonfood oilseed varieties are being rapidly developed, new varieties may affect agricultural production efficiency and life-cycle assessment results. Current, detailed feedstock production information is necessary to accurately assess impacts of the biofuel life-cycle. The life-cycle impacts of four nonfood oilseeds (carinata [ L. Braun], camelina [ L. Crantz], canola or rapeseed [ L.], and sunflower [ L.]) were modeled using Argonne National Laboratory's GREET model to compare feedstocks for renewable biojet production using cold-press oil extraction. Only feedstock-related inputs were varied, allowing isolation of feedstock influence. Carinata and camelina performed slightly better than other oilseed crops at most product stages and impact categories as a result of current, low-input agricultural information and new feedstock varieties. Between 40 to 50% of SO and NO emissions, ∼25% of greenhouse gas (GHG) emissions, and ∼40% of total energy consumption for the biojet production impact occurred during feedstock production. Within the first standard deviation, total well-to-tank emissions varied between ∼13% (GHG) and ∼35% (SO) for all feedstocks emphasizing the importance of accurate agricultural production information. Nonfood oilseed feedstock properties (e.g., oil content, density) and agricultural management (e.g., fertilization, yield) affect life-cycle assessment results. Using biofuels in feedstock production and focusing on low-impact management would assist producers in improving overall product sustainability.