Related Experiment Video
Updated: Mar 21, 2026

Atom Probe Tomography Studies on the CuIn,GaSe2 Grain Boundaries
Published on: April 22, 2013
Aberration-Corrected Scanning Transmission Electron Microscope (STEM) Through-Focus Imaging for Three-Dimensional
Charles Austin Wade1, Mark J McLean1, Richard P Vinci1
11Department of Materials Science and Engineering,Lehigh University,Bethlehem, PA 18015,USA.
Abstract:
Scanning transmission electron microscope (STEM) through-focus imaging (TFI) has been used to determine the three-dimensional atomic structure of Bi segregation-induced brittle Cu grain boundaries (GBs). With TFI, it is possible to observe single Bi atom distributions along Cu [001] twist GBs using an aberration-corrected STEM operating at 200 kV. The depth resolution is ~5 nm. Specimens with GBs intentionally inclined with respect to the microscope's optic axis were used to investigate Bi segregant atom distributions along and through the Cu GB. It was found that Bi atoms exist at most once per Cu unit cell along the GB, meaning that no continuous GB film is present. Therefore, the reduced fracture toughness of this particular Bi-doped Cu boundary would not be caused by fracture of Bi-Bi bonds.
Related Concept Videos
Scanning Electron Microscopy
Fundamental Principles
Accelerated...
Electron Microscope Tomography and Single-particle Reconstruction
Electron Tomography
Electron tomography can be performed either in TEM or STEM (scanning transmission...

