Related Experiment Video
Updated: Mar 21, 2026

Effect of Bending on the Electrical Characteristics of Flexible Organic Single Crystal-based Field-effect Transistors
Published on: November 7, 2016
A TIPS-TPDO-tetraCN-Based n-Type Organic Field-Effect Transistor with a Cross-linked PMMA Polymer Gate Dielectric
Sungyeop Jung1, Mohammed Albariqi1,2, Guillaume Gruntz3
1Laboratoire de Physique des Interfaces et des Couches Minces (LPICM), UMR CNRS 7647, École polytechnique, Université Paris-Saclay , 91128 Palaiseau Cedex, France.
Abstract:
Recent improvement in the performance of the n-type organic semiconductors as well as thin gate dielectrics based on cross-linked polymers offers new opportunities to develop high-performance low-voltage n-type OFETs suitable for organic complementary circuits. Using TIPS-tetracyanotriphenodioxazine (TIPS-TPDO-tetraCN) and cross-linked poly(methyl methacrylate) (c-PMMA), respectively as n-type organic semiconductor and gate dielectric, linear regime field-effect mobility (1.8 ± 0.2) × 10(-2) cm(2) V(-1)s(-1), small spatial standard deviation of threshold voltage (∼0.1 V), and operating voltage less than 3 V are attainable with the same device structure and contact materials used commonly for p-type OFETs. Through comparative static and dynamic characterizations of c-PMMA and PMMA gate dielectrics, it is shown that both smaller thickness and larger relative permittivity of c-PMMA contributes to reduced operating voltage. Furthermore, negligible hysteresis brings evidence to small trap states in the semiconductor near gate dielectric of the n-type OFETs with c-PMMA. The use of TIPS-TPDO-tetraCN and c-PMMA is fully compatible with polyethylene terephthalate substrate, giving promise to various flexible applications.
Related Concept Videos
MOS Capacitor
The metal gate is typically made from highly conductive materials such as aluminum or polysilicon. Beneath the metal gate lies a thin layer of...
MOSFET
In an n-MOSFET, the structure includes n-type source and drain...
Field Effect Transistor
MOSFET: Enhancement Mode
In their basic form, enhancement-mode MOSFETs are typically non-conductive when the gate-source voltage (Vgs) is zero. This default 'off' state means no...

