Dispersion and shear-induced orientation of anisotropic nanoparticle filled polymer nanocomposites: insights from...

Although a large number of studies have been performed to study the dispersion behavior of spherical nanoparticles (NPs) in the polymer matrix, little effort has been directed to anisotropic NPs via simulation, which is convenient for controlling the physical parameters compared to experiment. In this work we adopt molecular dynamics simulation to study polymer nanocomposites filled with anisotropic NPs such as graphene and carbon nanotubes (CNTs). We investigate the effects of the grafting position, grafting density, the length and flexibility of the grafted chains on the dispersion of graphene and CNTs. In particular, we find that when the grafting position is located on the surface center of the graphene or the middle of the CNT, the dispersion state is the best, leading to the greatest stress-strain behavior. Meanwhile, the mechanical property can be further strengthened by introducing chemical couplings in the interfacial region, by chemically tethering the grafted chains to the matrix chains. To monitor the processing effect, we exert a dynamic periodic shear deformation in the x direction with its gradient in the y direction. Polymer chains are found to align in the x direction, graphene sheets align in the xoz plane and CNTs orientate in the z direction. We study the effects of the shear amplitude, the shear frequency, polymer-NP interaction strength and volume fraction of NPs on the stress-strain behavior. We also observe that the relaxation process following the shear deformation deteriorates the mechanical performance, resulting from the disorientation of polymer chains and NPs. In general, this work could provide valuable guidance in manipulating the distribution and alignment of graphene and CNTs in the polymer matrix.