Related Experiment Video

Updated: Mar 19, 2026

Quasistatic Mechanical Testing for Computer-Aided Design and Manufacturing Occlusal Veneers Cemented to Milled Dentin Analog Material
07:42

Quasistatic Mechanical Testing for Computer-Aided Design and Manufacturing Occlusal Veneers Cemented to Milled Dentin Analog Material

Published on: December 20, 2024

932

Stress Distribution in All-Ceramic Posterior 4-Unit Fixed Dental Prostheses Supported in Different Ways: Finite

Annike Rand1, Philipp Kohorst, Andreas Greuling

  • 1*Research Associate, Department of Prosthetic Dentistry and Biomedical Materials Science, Hannover Medical School, Hannover, Germany. †Professor, Head of Department of Prosthetic Dentistry and Biomaterials, Saarland University Faculty of Medicine, Homburg, Germany. ‡Head of Materials Research Lab, Department of Prosthetic Dentistry and Biomedical Materials Science, Hannover Medical School, Hannover, Germany. §Research Associate, Department of Prosthetic Dentistry and Biomedical Materials Science, Hannover Medical School, Hannover, Germany. ¶Professor, Head of Department of Prosthetic Dentistry and Biomedical Materials Science, Hannover Medical School, Hannover, Germany.

Implant Dentistry
|June 10, 2016
PubMed
Abstract

More Related Videos

A Coupled Experiment-finite Element Modeling Methodology for Assessing High Strain Rate Mechanical Response of Soft Biomaterials11:28

A Coupled Experiment-finite Element Modeling Methodology for Assessing High Strain Rate Mechanical Response of Soft Biomaterials

Published on: May 18, 2015

13.0K
Shrinkage of Dental Composite in Simulated Cavity Measured with Digital Image Correlation08:45

Shrinkage of Dental Composite in Simulated Cavity Measured with Digital Image Correlation

Published on: July 21, 2014

14.1K

Related Concept Videos

Stresses under Combined Loadings01:23

Stresses under Combined Loadings

When analyzing a bent tube with a circular cross-section subjected to multiple forces, it is crucial to determine the stress distribution in order to maintain structural integrity under varied load conditions.
The process begins by slicing the tube at critical points and analyzing the internal forces and stress components at these sections, focusing on the centroid. Normal stresses, generated by axial forces and bending moments, are either compressive or tensile and vary across the section from...
524
Stress Concentrations01:24

Stress Concentrations

Stress concentration is when stress intensifies near discontinuities such as holes or abrupt cross-sectional changes in a structural member. This localized stress can often surpass the average stress within the member. The stress distribution in flat bars, either with a circular hole or varying widths connected by fillets, can be determined experimentally using a photoelastic method. The results are based on ratios of geometric parameters like the ratio of the hole's radius to the smaller...
767