[Experimental study on the optimal size of the tricuspid valve annular area on annuloplasty]

The optimal size of tricuspid valve annular area (TVAA) by annuloplasty for tricuspid regurgitation remains controversial. Recently, we developed a new measuring system which permits to do real-time measurement of tricuspid valve annular area in anesthetized dogs. Using this system, we studied the optimal size of TVAA by annuloplasty. After the right atrial incision, a metal thread which functions as a sense loop of the electromagnetic fields was stitched along the tricuspid valve annulus (visible juncture of the valve leaflets and the cardiac wall). The drive coil assembly was placed perpendicular to the extension of the long axis of the heart and was directed toward the tricuspid valve region. During control conditions, the maximum TVAA appeared at the onset of ventricular systole. The minimum TVAA appeared during the early ventricular diastolic phase which included the ventricular isovolumic relaxation phase. The maximum TVAA varied in five dogs between 2.2 cm2 and 3.1 cm2, the minimum TVAA also varied between 1.8 cm2 and 2.5 cm2: During regular sinus rhythm, a decrease of TVAA during one cardiac cycle ranged between 11.9% and 22.4% of the maximum size. When TVAA was not decreased by annuloplasty to the minimum area which was observed during cardiac cycle in the control state, the cardiac output and the right atrial pressure remained unchanged, because the ventricular filling was not obstructed. On the other hand, when TVAA was decreased smaller than this minimum area, the cardiac output decreased and the right atrial pressure rose.(ABSTRACT TRUNCATED AT 250 WORDS)