Impact of Oxy-Fuel Conditions on Elemental Mercury Re-Emission in Wet Flue Gas Desulfurization Systems

This study evaluates some of the variables that may influence mercury retention in wet flue gas desulfurization (WFGD) plants, focusing on oxy-coal combustion processes and differences when compared with atmospheres enriched in N2. The main drawback of using WFGD for mercury capture is the possibility of unwanted reduction of dissolved Hg(2+), leading to the re-emission of insoluble elemental mercury (Hg(0)), which decreases efficiency. To acquire a better understanding of the mercury re-emission reactions in WFGD systems, this work analyses different variables that influence the behavior of mercury in slurries obtained from two limestones, under an oxy-combustion atmosphere. The O2 supplied to the reactor, the influence of the pH, the concentration of mercury in the gas phase, and the enhancement of mercury in the slurry were the variables considered. The study was performed at laboratory scale, where possible reactions between the components in the scrubber can be individually evaluated. It was found that in an oxy-combustion atmosphere (mostly CO2), the re-emission of Hg(0) is lower than under a N2-enriched atmosphere, and the mercury is mainly retained as Hg(2+) in the liquid phase.