Related Experiment Video
Updated: Mar 18, 2026

Fabrication And Characterization Of Photonic Crystal Slow Light Waveguides And Cavities
Published on: November 30, 2012
Bending loss characterization in nodeless hollow-core anti-resonant fiber
Abstract:
We report high performance nodeless hollow-core anti-resonant fibers (HARFs) with broadband guidance from 850 nm to >1700 nm and transmission attenuation of ~100 dB/km. We systematically investigate their bending loss behaviors using both theoretical and experimental approaches. While a low bending loss value of 0.2 dB/m at 5 cm bending radius is attained in the long wavelength side (LWS) of the spectrum, in this paper, we pursue light guidance in the short wavelength side (SWS) under tight bending, which is yet to be explored. We analytically predict and experimentally verify a sub transmission band in the SWS with a broad bandwidth of 110 THz and an acceptable loss of 4.5 dB/m at 2 cm bending radius, indicating that light can be simultaneously guided in LWS and SWS even under tight bending condition. This provides an unprecedented degree of freedom to tailor the transmission spectrum under a tight bending state and opens new opportunities for HARFs to march into practical applications where broadband guidance under small bending radius is a prerequisite.
Related Concept Videos
Unsymmetric Bending - Angle of Neutral Axis
When a bending moment is applied at an angle θ concerning the vertical axis of a symmetrical member, it can be resolved into components along the member's principal...
Residual Stresses in Bending
Bending
In pure bending, the bending stress in a beam is calculated based on the bending moment and...
Unsymmetric Bending
Bending and Torsional Moments
The reaction developed in a structural element when subjected to an external force causes the element to bend. When a structural element bends upwards, it creates compressive normal forces on the top and tensile normal forces on the bottom, resulting in a couple that determines the bending...
Bending of Curved Members - Strain Analysis
The important part of bending analysis for such a member...

