Related Experiment Video
Updated: Mar 17, 2026
Fabrication of Low Temperature Carbon Nanotube Vertical Interconnects Compatible with Semiconductor Technology
Published on: December 7, 2015
Spray-Coated Halloysite-Epoxy Composites: A Means To Create Mechanically Robust, Vertically Aligned Nanotube
Kenan Song1,2,3, Roberta Polak1,2,3, Dayong Chen1,2,3
1Department of Materials Science and Engineering, Massachusetts Institute of Technology (MIT) , 77 Mass Avenue, Cambridge, Massachusetts 02139, United States.
Abstract:
Halloysite nanotube-filled epoxy composites were fabricated using spray-coating methods. The halloysite nanotubes (HNTs) were aligned by the hydrodynamic flow conditions at the spray nozzle, and the polymer viscosity helped to preserve this preferential orientation in the final coatings on the target substrates. Electron microscopy demonstrated a consistent trend of higher orientation degree in the nanocomposite coatings as viscosity increased. The nanoindentation mechanical performances of these coatings were studied using a Hysitron TriboIndenter device. Composites showed improvements up to ∼50% in modulus and ∼100% in hardness as compared to pure epoxy, and the largest improvements in mechanical performance correlated with higher alignment of HNTs along the plane-normal direction. Achieving this nanotube alignment using a simple spray-coating method suggests potential for large-scale production of multifunctional anisotropic nanocomposite coatings on a variety of rigid and deformable substrates.
