Nanocrystalline Ferrihydrite-Based Catalysts for Fischer-Tropsch Synthesis: Part I. Reduction and Carburization
Abstract:
Temperature-programmed reduction using H2 (H2-TPR) and CO (CO-TPR) was carried out to investigate the reduction and carburization behavior of nanocrystalline ferrihydrite-based Fe/Cu/K/SiO2 catalysts for use in Fischer-Tropsch synthesis (FTS). Unlike pure ferrihydrite, the ferrihydrite-based catalysts did not pass through the intermediate decomposition step of ferrihydrite (Fe9O2(OH)23) into hematite (a-Fe2O3) as they were reduced into magnetite (Fe3O4). This is attributed to the enhanced thermal stability induced by SiO2. For the ferrihydrite-based catalysts, the reduction of ferrihydrite into magnetite occurred in two stages because the reduction promoter, Cu, is not homogeneously distributed on the catalyst surfaces. The Cu-rich sites are likely to be reduced in the first stage, and the Cu-lean sites may be reduced in the second stage. After the ferrihydrite is reduced to magnetite, the reduction process of magnetite was similar to that for conventional hematite-based FTS catalysts: 'magnetite --> metallic iron' and 'magnetite --> wüstite (FeO) or fayalite (Fe2SiO4) --> metallic iron' in the H2 atmosphere; 'magnetite --> iron carbides' in the CO atmosphere.
Related Concept Videos
01:22Heterogeneous Catalysis
02:50Catalysis
02:24Reduction of Alkynes to cis-Alkenes: Catalytic Hydrogenation
Like alkenes, alkynes can be reduced to alkanes in the presence of transition metal catalysts such as Pt, Pd, or Ni. The reaction involves two sequential syn additions of hydrogen via a cis-alkene intermediate.
02:17Reduction of Alkenes: Asymmetric Catalytic Hydrogenation
The metal catalyst used can be either heterogeneous or homogeneous. When hydrogenation of an alkene generates a chiral center, a pair of enantiomeric products is expected to form. However, an enantiomeric excess of one of the products can be facilitated using an enantioselective reaction or an...
02:13Reduction of Alkenes: Catalytic Hydrogenation
Metals like palladium, platinum, and nickel are commonly used in their solid forms — fine powder on an inert surface. As these catalysts remain insoluble in the reaction mixture, they are referred to as heterogeneous catalysts.
The hydrogenation process takes place on the...
01:28Reduction of Benzene to Cyclohexane: Catalytic Hydrogenation