Characterizing dispersivity and stagnation in porous media using NMR flow propagators

Low-field nuclear magnetic resonance (NMR) displacement probability distributions (flow propagators) are presented for water flowing through heterogeneous porous materials. Four sedimentary rocks have been chosen as example systems: Dolostone, Bentheimer sandstone, Berea sandstone, and Indiana limestone (in order of decreasing permeability). The fluid displacement is characterized by pre-asymptotic Stokes' flow and so the probability distributions are bimodal, with peaks corresponding to stagnant fluid in dead-end pores and flowing fluid in the connected porosity. Cut-off Gaussian functions are used to fit the flowing and stagnant peaks independently. An effective dispersivity length scale Lv (also known as the mixing length scale) is estimated by fitting the portion of the probability distribution corresponding to the flowing fluid. For the relatively homogeneous Bentheimer sandstone, the ratio of effective dispersivity length scale to effective transport diameter dt is Lv/dt≈16, which is an order of magnitude larger than for randomly packed glass beads where Lv/dt≈1.8. We compare these dispersivity parameters to similar values extracted from a cumulant analysis of the entire propagator. Fitting a cut-off Gaussian avoids the usual complications of analyzing dispersion in the presence of the ubiquitous stagnant fluid, and results in a clear demonstration of the influence of long-range heterogeneities on the dispersivity for flow in real sedimentary rocks.