Related Experiment Video
Updated: Mar 17, 2026
Shaping the Amplitude and Phase of Laser Beams by Using a Phase-only Spatial Light Modulator
Published on: January 28, 2019
Improvement of penetration of modified amplitude and phase estimation beamformer
1Graduate School of Science and Engineering, University of Toyama, Toyama, 930-8555, Japan. hasegawa@eng.u-toyama.ac.jp.
Purpose:
High-frame-rate ultrasound is the predominant technique for the measurement of tissue dynamics. It enables an imaging frame rate of over 1 kHz using unfocused transmit beams and parallel receive beamforming. On the other hand, the spatial resolution is degraded compared to the conventional method based on sequential transmissions of focused beams. For improvement of the spatial resolution of high-frame-rate ultrasound, we have investigated a kind of adaptive beamformer, i.e., amplitude and phase estimation (APES) beamformer.
Method:
In our previous study, it was shown that the APES beamformer realized a significantly better spatial resolution than the conventional delay and sum (DAS) beamformer without sub-array averaging and diagonal loading by considering the directivity of each transducer element. By omitting sub-array averaging and adding sub-aperture beamforming, the computational load could also be reduced significantly. One shortcoming of the proposed APES beamformer with element directivity, i.e., modified APES beamformer, is the degradation of penetration compared with the conventional APES beamformer with sub-array averaging and diagonal loading. In the present study, sub-array averaging and diagonal loading were applied to the modified APES beamformer for the improvement of the penetration.
Results:
The conventional and modified APES beamformers realized similar performances when used with sub-array averaging and diagonal loading. Furthermore, the modified APES beamformer realized better spatial resolution and improved penetration when used with sub-aperture beamforming and diagonal loading. The modified APES beamformer with diagonal loading at 0.025 of the received power realized a penetration similar to that of the conventional APES beamformer with sub-array averaging and diagonal loading. The lateral spatial resolutions achieved with the conventional and modified APES beamformers were 0.36 and 0.31 mm, respectively. In addition, the modified APES beamformer could reduce the dimension of the covariance matrix to [Formula: see text], versus [Formula: see text] of the conventional APES beamformer, resulting in a computation time of only 1.1 %.
Conclusion:
Penetration of the modified APES beamformer could be improved significantly by diagonal loading, which hardly increases the computational complexity.
Related Concept Videos
01:10Interference: Path Lengths
Two special sources may be considered when they are in phase. This can be easily achieved by feeding the two sources from the same source. An example would be synchronizing the two speakers by feeding them with the same source, such as the sound waves produced by a tuning fork. This setup ensures that the two sources have the same frequency and are...
01:24Time and frequency -Domain Interpretation of Phase-lead Control
The design of phase-lead control involves the strategic placement of poles and zeros to balance steady-state error and system...