Crystallization Behavior of Amorphous Si3N4 and Particle Size Control of the Crystallized α-Si3N4

Amorphous silicon nitride powder prepared by low-temperature vapor-phase reaction was heat treated at various temperatures for different periods of time to examine the crystallization behavior. The effects of the heat-treatment temperature and duration on the degree of crystallization were investigated along with the effect of the heat-up rate on the particle size, and its distribution, of the crystallized α-phase silicon nitride powder. A phase transition from amorphous to α-phase occurred at a temperature above 1400 degrees C. The crystallization. process was completed after heat treatment at 1500 degrees C for 3 h or at 1550 degrees C for 1 h. The crystallization process starts at the surface of the amorphous particle: while the outer regions of the particle become crystalline, the inner part remains amorphous. The re-arrangement of the Si and N atoms on the surface of the amorphous particle leads to the formation of hexagonal crystals that are separated from the host amorphous particle. The particle size and size distribution can be controlled by varying the heat-treatment profile (namely, the heat-treatment temperature, heating rate, and heating duration at the specified temperature), which can be used to control the relative extent of the nucleation and growth. The completion of most of the nucleation process by lowering the heat-up rate can be used to achieve a singlet particle size distribution. Bimodal particle size distribution can be achieved by fast heat-up during the crystallization process.