Related Experiment Video
Updated: Mar 16, 2026

Bacterial Detection & Identification Using Electrochemical Sensors
Published on: April 23, 2013
Sensitive detection of maltose and glucose based on dual enzyme-displayed bacteria electrochemical biosensor
Aihua Liu1, Qiaolin Lang2, Bo Liang3
1Institute for Biosensing, and College of Chemistry and Chemical Engineering, Qingdao University, 308 Ningxia Road, Qingdao 266071, China; Key Laboratory for Biosensors of Shangdong Province, China.
Abstract:
Glucoamylase-displayed bacteria (GA-bacteria) and glucose dehydrogenase-displayed bacteria (GDH-bacteria) were co-immobilized on multi-walled carbon nanotubes (MWNTs) modified glassy carbon electrode (GCE) to construct GA-bacteria/GDH-bacteria/MWNTs/GCE biosensor. The biosensor was developed by optimizing the loading amount and the ratio of GA-bacteria to GDH-bacteria. The as-prepared biosensor exhibited a wide dynamic range of 0.2-10mM and a low detection limit of 0.1mM maltose (S/N=3). The biosensor also had a linear response to glucose in the range of 0.1-2.0mM and a low detection limit of 0.04mM glucose (S/N=3). Interestingly, at the same concentration, glucose was 3.75-fold sensitive than that of maltose at the proposed biosensor. No interferences were observed for other possible mono- and disaccharides. The biosensor also demonstrated good long-term storage stability and repeatability. Further, using both GDH-bacteria/MWNTs/GCE biosensor and GA-bacteria/GDH-bacteria/MWNTs/GCE biosensor, glucose and maltose in real samples can be detected. Therefore, the proposed biosensor is capable of monitoring the food manufacturing and fermentation process.

