Related Experiment Video
Updated: Mar 16, 2026
Subjective Refraction Test Using a Smartphone for Vision Screening
Published on: October 18, 2024
Mathematical Discrepancies of the Tono-Pen Applanation Tonometer
Clinton J Doering1, Eugenia Feldman, Tali Bdolah-Abram
1*Eye Care for Animals, Tucson, AZ †Koret School of Veterinary Medicine, The Hebrew University of Jerusalem, Rehovot, Israel.
Purpose Of The Study:
The purpose of the study was to determine if Tono-Pen tonometers use simple average and coefficient of variation (CV) algorithms to calculate intraocular pressure (IOP).
Material And Methods:
IOPs were measured as part of routine ocular examination in 152 client-owned dogs. Using 11 Tono-Pen's, a total of 778 averaged readings were collected. Individual IOP readings, and average IOP and CV displayed by the instrument, were recorded. Average IOP and CV were then manually calculated from individual readings and compared with those displayed by the instrument.
Results:
The mean absolute difference between the calculated and displayed average IOP was 1.37±2.01 mm Hg (P<0.001). In 6% of cases, the calculated average IOP was 5 to 15 mm Hg different from the displayed average IOP. The difference between the displayed and calculated average IOP was significantly higher in hypertensive eyes with displayed IOP≥25 mm Hg. Calculated CV was equal to, lower than, or greater than displayed CV in 28.6%, 1.5%, and 69.7% of cases, respectively. In 17.6% of cases, calculated CV was >20%, but displayed CV was <5%. Receiver operating characteristic analysis could not correlate number of individual IOP readings with magnitude of difference in average IOP.
Conclusions:
Calculated average IOP and CV differ significantly from values displayed by the instrument, especially at higher IOPs. A difference of ≥5 mm Hg between calculated and displayed average IOP seen in 6% of cases may impact clinical judgement. Displayed CV<5% does not correlate with accurate IOP measurement based on individual results.
Related Concept Videos
01:18Errors in Taping
02:46Uncertainty in Measurement: Reading Instruments
01:15Distance Corrections
01:28Accuracy, limits, and approximation
Accuracy is defined as the closeness of the measured value to the true or actual value. In engineering mechanics, repeated measurements are taken during theoretical or experimental analyses to ensure that the result is precise and accurate.
The accuracy of any solution is based on the...
01:28Special considerations while measuring blood pressure
Monitoring Both Arms:
Monitoring BP in both arms during the initial assessment is advisable, as the systolic value may differ by five to ten mm Hg between arms. For subsequent BP assessments, use the arm with the higher reading.
01:14Assessing Body Temperature - Tympanic membrane
Step 1: Begin by practicing good hand hygiene to prevent the transmission of microorganisms.
Step 2: Turn on the thermometer and wait until the ready sign appears on the screen to ensure accurate measurement.
Step 3: Slide the probe cover in place to prevent cross-contamination.
Step 4: Instruct the patient to tilt their head to the side for comfort and check for cerumen...