Related Experiment Video
Updated: Mar 15, 2026

Three-Dimensionally Printed Microfluidic Cross-flow System for Ultrafiltration/Nanofiltration Membrane Performance Testing
Published on: February 13, 2016
Integrated oxidation membrane filtration process - NOM rejection and membrane fouling
J Winter1, W Uhl2, P R Bérubé1
1Department of Civil Engineering, University of British Columbia, 2002-6250 Applied Sciences Lane, Vancouver, BC, V6T 1Z4, Canada.
Abstract:
The extent and mechanisms by which organic matter in a solution can be retained and foul a membrane largely depends on the molecular weight of the material being filtered and the molecular weight cut-off (MWCO) of the membrane. The present study investigated the effect of the MWCO of a membrane and the molecular weight distribution of natural organic matter (NOM) in a source water on the increase in resistance to the permeate flux over time. Of particular interest was the effect of oxidation, applied prior to membrane filtration, on the predominant fouling mechanism. Oxidation can change the molecular weight distribution of organic matter in raw water, and therefore the ability of a membrane to retain this organic matter. Oxidation, using both ozonation and UV/H2O2, could effectively reduce the extent of fouling for higher MWCO membranes. However, neither oxidation approaches could effectively reduce the extent of fouling for lower MWCO membranes, likely because oxidation could not effectively oxidize lower molecular weight organic matter. Althoug the data indicated that the extent of fouling is increasing with the amount of DOC retained by the membrane, no statistically significant correlation was observed between these parameters. The results suggest that oxidation did not affect the predominant fouling mechanism. However, it did affect the molecular weight distribution of the organic matter retained by the membranes, and as a result, the resistance offered by the foulant cake layer.

