Related Experiment Video
Updated: Mar 15, 2026

Applying Hyperspectral Reflectance Imaging to Investigate the Palettes and the Techniques of Painters
Published on: June 18, 2021
A multi-analytical approach for the characterization of wall painting materials on contemporary buildings
Donata Magrini1, Susanna Bracci1, Emma Cantisani1
1CNR-ICVBC National Research Council, Institute for Conservation and Valorization of Cultural Heritage, Via Madonna del Piano 10, 50019 Sesto Fiorentino, Florence, Italy.
Abstract:
Samples from Keith Haring's wall painting of the Necker Children Hospital in Paris were studied by a multi-analytical protocol. X-ray fluorescence (XRF), powder X-ray diffraction (XRDP), Electron microscope (SEM-EDS), Infrared and Raman spectroscopy (μ-FT-IR and μ-Raman) measurements were performed in order to characterize the materials and to identify the art technique used to produce this contemporary work. Materials from the mural suffered from severe detachments of materials and several fragments were found on the ground beneath. Some of these fragments, which were representative of the whole palette and stratigraphic sequence, were collected and studied. The fragments were sufficiently large to enable non-invasive measurements to be performed in order to characterize the materials. A comparison of the data of the techniques applied revealed that Haring's palette was composed of organic pigments such as Naphtol red, phthalocyanine blue and green and Hansa yellow, in accordance with those used previously by the artist in other painted murals.
More Related Videos
Related Concept Videos
Composite Masonry Walls
Masonry Curtain Walls
Masonry Loadbearing Walls
Masonry Cavity Walls
Maintaining a clean cavity during construction...
Spanning Openings in Brick Walls
Lintels are primary supports used to span openings and can be crafted from materials such as reinforced concrete, steel-reinforced brick masonry, or simple steel angles. These are straightforward to install and are typically concealed...
Posttensioned Masonry Walls
Post-tensioned masonry walls use high-strength steel rods or flexible tendons to enhance the strength and efficiency of masonry structures. These elements are securely anchored to the foundation and extend vertically either within the cores of the masonry units or between the masonry wythes. The construction process involves building the wall with these tensioning elements in place and allowing the mortar to fully cure.
Following the curing process, the tensioning begins. Steel rods are...

