pH and Eh effects on phosphorus fate in constructed wetland's sludge surface deposit
Boram Kim1, Mathieu Gautier2, Arnaud Simidoff2
1Univ Lyon, INSA Lyon, DEEP, 20 av. A. Einstein, 69621 Villeurbanne Cedex, France; SCIRPE, Society of Design and Production Engineering for Wastewater Purification, 5 Allée Alban Vistel, 69110 Sainte-Foy-Lès-Lyon, France.
Abstract:
The objective of the present study was to assess the influence of extreme pH and redox potential (Eh) conditions on phosphorus (P) retention within the surface sludge deposit layer of a vertical flow constructed wetland (VFCW) where phosphorus was captured by FeCl3 injection. Series of 27 successive batch leaching tests were conducted under acidic, alkaline or reductive conditions using a representative sludge sample taken from an 8-year old VFCW plant. Experiments were followed by monitoring the pH and Eh variations and analysing the releases of P and other selected elements into the solutions. The sludge material was also analyzed before and after leaching, using solution (31)P NMR spectroscopy and sequential chemical extractions, in order to evaluate dissolutions of both organic and inorganic P-bearing species and their respective contributions to P release. The correlations between the monitored variables were analyzed and visualized through principal components analyses (PCA). Results showed a very good stability of P retention in the sludge deposit and a relatively good acid-buffering capacity of the sludge, revealing that the risk of accidental P release into the environment would be extremely low during the real plant operation.
Related Concept Videos
Factors Affecting Solubility
The Phosphorus Cycle
Phosphate Buffer
Sodium dihydrogen phosphate does not fully dissociate in neutral or acidic solutions. When a strong base, such as sodium hydroxide (NaOH), is introduced into the solution, sodium dihydrogen phosphate...


