Experimental demonstration of a 10Gb/s non-orthogonal multi-dimensional CAP-PON system based on the ISI and CCI

Optics Letters
|September 9, 2016
PubMed

Related Concept Videos

Design Example: Capacitance Multiplier Circuit01:20

Design Example: Capacitance Multiplier Circuit

In integrated circuit technology, a capacitance multiplier is often utilized to produce a larger capacitance value when a small physical capacitance falls short. This is achieved by a circuit that multiplies capacitance values by a factor of up to 1000, such that a 10-pF capacitor can replicate the performance of a 100-nF capacitor.
The circuit illustrated in Figure 1 below incorporates two op-amps, with the first operating as a voltage follower and the second acting as an inverting amplifier.
1.7K
Equivalent Capacitance01:19

Equivalent Capacitance

From the study of resistive circuits, it is understood that employing a series-parallel combination serves as an effective strategy for simplifying circuits. Capacitors can be arranged within a circuit in one of two ways: a series configuration or a parallel configuration. The way these capacitors are connected to a battery will influence both the potential drop across each individual capacitor and the size of the charge that each capacitor can store. This is determined by the specific type of...
824
Equivalent Capacitance01:19

Equivalent Capacitance

Multiple capacitors can be connected in a circuit in series or parallel configuration. When the capacitor combination is connected to a battery, the potential drop across each capacitor and the magnitude of charge stored in the individual capacitor depends on the type of the connection. The capacitor combination is replaced by a single equivalent capacitor that stores the same amount of charge as the combination for a given potential difference.
The following strategies are adopted to calculate...
2.3K
Spherical and Cylindrical Capacitor01:26

Spherical and Cylindrical Capacitor

A spherical capacitor consists of two concentric conducting spherical shells of radii R1 (inner shell) and R2 (outer shell). The shells have  equal and opposite charges of +Q and −Q, respectively. For an isolated conducting spherical capacitor, the radius of the outer shell can be considered to be infinite.
Conventionally, considering the  symmetry, the electric field between the concentric shells of a spherical capacitor is directed radially outward. The magnitude of the field,...
7.0K
Vector Algebra: Method of Components01:08

Vector Algebra: Method of Components

It is cumbersome to find the magnitudes of vectors using the parallelogram rule or using the graphical method to perform mathematical operations like addition, subtraction, and multiplication. There are two ways to circumvent this algebraic complexity. One way is to draw the vectors to scale, as in navigation, and read approximate vector lengths and angles (directions) from the graphs. The other way is to use the method of components.
In many applications, the magnitudes and directions of...
20.4K
Dielectric Polarization in a Capacitor01:31

Dielectric Polarization in a Capacitor

The presence of a dielectric medium in a capacitor not only changes the voltage and capacitance but also affects the electric field. In general, dielectrics can be of two types: polar and nonpolar. In a polar dielectric, the positive and negative charges in the molecules are separated by a distance and hence have a permanent dipole moment. In contrast, no such charge separation exists in a nonpolar dielectric, however the nonpolar molecules get polarized in the presence of an external electric...
6.4K