Effect of nitrate concentration, pH, and hydraulic retention time on autotrophic denitrification efficiency with
Jun-Feng Su1, Jing-Xin Shi2, Ting-Lin Huang2
1School of Environmental and Municipal Engineering, Xi'an University of Architecture and Technology, Xi'an 710055, China E-mail: sjf1977518@sina.com; State Key Laboratory of Urban Water Resource and Environment, School of Municipal and Environmental Engineering, Harbin Institute of Technology, Harbin 150090, China.
Abstract:
The role of electron donors (Fe(2+) and Mn(2+)) in the autotrophic denitrification of contaminated groundwater by bacterial strain SY6 was characterized based on empirical laboratory-scale analysis. Strain SY6 can utilize Fe(2+) more efficiently than Mn(2+) as an electron donor. This study has shown that the highest nitrate removal ratio, observed with Fe(2+) as the electron donor, was approximately 88.89%. An immobilized biological filter reactor was tested by using three levels of influent nitrate (10, 30, and 50 mg/L), three pH levels (6, 7, and 8), and three levels of hydraulic retention time (HRT; 6, 8, and 12 h), respectively. An optimal nitrate removal ratio of about 95% was achieved at pH 6.0 using a nitrate concentration of 50 mg/L and HRT of 12 h with Fe(2+) as an electron donor. The study showed that 90% of Fe(2+) and 75.52% removal of Mn(2+) were achieved at pH 8.0 with a nitrate concentration of 50 mg/L and a HRT of 12 h. Removal ratio of Fe(2+) and Mn(2+) is higher with higher influent nitrate and HRT. A weakly alkaline environment assisted the removal of Fe(2+) and Mn(2+).
Related Concept Videos
Metabolism of Chemolithotrophs
Inorganic Nitrogen Assimilation
Microbial Nutrition
EDTA: Auxiliary Complexing Reagents
2° Amines to N-Nitrosamines: Reaction with NaNO2


