Related Experiment Video
Updated: Mar 13, 2026

Glass-Based Devices to Generate Drops and Emulsions
Published on: April 5, 2022
Response of driven sessile drops with contact-line dissipation
Joshua B Bostwick1, Paul H Steen2
1Department of Mechanical Engineering, Clemson University, Clemson, SC 29631, USA. jbostwi@clemson.edu.
Abstract:
A partially-wetting sessile drop is driven by a sinusoidal pressure field that produces capillary waves on the liquid/gas interface. Response diagrams and phase shifts for the droplet, whose contact-line moves with contact-angle that is a smooth function of the contact line speed, are reported. Contact-line dissipation originating from the contact-line speed condition leads to damping for drops with finite contact-line mobility, even for inviscid fluids. The critical mobility and associated driving frequency to generate the largest contact-line dissipation is computed. Viscous dissipation is approximated using the irrotational flow and the critical Ohnesorge number bounding regions beyond which a given mode becomes over-damped is computed. Regions of modal coexistence where two modes can be simultaneously excited by a single forcing frequency are identified. Predictions compare favorably to related experiments on vibrated drops.
More Related Videos
07:18Measuring the Interaction Force Between a Droplet and a Super-hydrophobic Substrate by the Optical Lever Method
Published on: June 14, 2019
07:57Taking Advantage of Reduced Droplet-surface Interaction to Optimize Transport of Bioanalytes in Digital Microfluidics
Published on: November 10, 2014
Related Concept Videos
Types of Damping
Damped Oscillations
Although friction and other non-conservative...
Types of Responses of Series RLC Circuits
RLC Series Circuits
Magnetic Damping
If, however, the bob is a slotted metal plate, the magnet produces a much smaller effect. When a slotted metal plate enters the field, an emf is induced by the change in flux; however, it is less effective because the slots limit the...
Parallel RLC Circuits
A simplified parallel RLC circuit model with a DC input source generating a step response is employed in this context. When the switch is turned on, Kirchhoff's current law is applied, leading to a second-order differential equation.