Related Experiment Video
Updated: Aug 15, 2026

Veno-Venous Extracorporeal Membrane Oxygenation in a Mouse
Published on: October 24, 2018
Conceptual and design features of a practical, clinically effective intravenous mechanical blood oxygen/carbon
1CardioPulmonics, Inc, University of Utah Research Park, Salt Lake City.
Abstract:
Conceptual and design features of a new intravascular blood gas exchange device include: placing multiple, thin-walled microporous hollow fibers in an elongated arrangement with a small overall outside diameter; covering the outer surface of each microporous hollow fiber with an ultra-thin continuous silicone coating; forming the hollow fibers into a configuration that produces disturbed flow of blood over the external surface of each fiber; placing the device in the subject's vena cava through a femoral or jugular venotomy; producing a flow of oxygen through the lumens of the hollow fibers, permitting exchange of oxygen and carbon dioxide between the venous blood outside and the gas inside the hollow fibers. Based on these principles, a practical, easily insertible, disposable, intravenacaval blood gas exchange device (IVOX) has been fabricated. Currently, devices with from 2,000 to 6,000 square centimeters of gas transfer surface area are being placed in the vena cavae of dogs and sheep for up to 7 days without altering the animal's hemodynamics, without producing serious hematologic sequelae, and with the capability of transferring in excess of 100 ml of oxygen and carbon dioxide to and from the venous blood of an intact, awake, standing animal. Clinical trials on human subjects with severe, acute, potentially reversible respiratory failure are in the planning stage.
More Related Videos
06:57Use of an Integrated Low-Flow Anesthetic Vaporizer, Ventilator, and Physiological Monitoring System for Rodents
Published on: July 9, 2020
07:15Preoxygenation Techniques for Tracheal Intubation in Critically Ill Adults Utilizing Oxygen Mask and Noninvasive Ventilation
Published on: December 5, 2025
Related Concept Videos
Oxygen Delivering System I: Nasal Cannula and Face Mask
Nasal Cannula
A nasal cannula is a lightweight tube split at one end into two prongs and placed in the nostrils. It is typically used to deliver low to medium levels of oxygen.
Suggested flow rate: The suggested flow rate for a nasal cannula typically ranges between 1 and 6 L/min.
Oxygen percentage setting:...
Oxygen Delivering System II: Venturi Mask and Transtracheal Oxygen
Venturi Mask
The Venturi mask, named after the Venturi effect, is designed to deliver precise oxygen concentrations. It consists of a large tube with an oxygen inlet that narrows down, causing a pressure drop that pulls air in through adjustable side ports. The mask is a lightweight,...
Oxygen Delivering System III: Tracheostomy and T-piece
Tracheostomy
A tracheostomy is a surgically created opening (stoma) in the anterior part of the trachea. It is used to establish a patient airway, bypass an upper airway obstruction, simplify the removal of secretions, permit long-term...
Mechanical Ventilation I: Indication and Settings
Mechanical Ventilation II: Invasive Ventilation
Negative-Pressure Ventilators
Negative-pressure ventilators create a vacuum around the chest or body to draw air into the lungs, simulating breathing. This method does not require an...
Mechanical Ventilation III: Noninvasive Ventilation
Noninvasive Positive-Pressure Ventilation (NIPPV)