Related Experiment Video
Updated: Mar 12, 2026

An Anaerobic Biosensor Assay for the Detection of Mercury and Cadmium
Published on: December 17, 2018
Evidence for Different Reactive Hg Sources and Chemical Compounds at Adjacent Valley and High Elevation Locations
Mae Sexauer Gustin1, Ashley M Pierce1, Jiaoyan Huang1
1Department of Natural Resources and Environmental Science and ‡Atmospheric Sciences Program, Department of Physics University of Nevada-Reno , Reno, Nevada 89557, United States.
Abstract:
The spatial distribution of chemical compounds and concentration of reactive mercury (RM), defined as the sum of gaseous oxidized mercury (GOM) and <3 μm particulate bound mercury (PBM), are poorly characterized. The objective of this study was to understand the chemistry, concentration, and spatial and temporal distribution of GOM at adjacent locations (12 km apart) with a difference in elevation of ∼1000 m. Atmospheric GOM measurements were made with passive and active samplers using membranes, and at one location, a Tekran mercury measurement system was used. The chemistry of GOM varied across time and location. On the basis of data collected, chemistry at the low elevation site adjacent to a highway was primarily influenced by pollutants generated by mobile sources (GOM = nitrogen and sulfur-based compounds), and the high elevation site (GOM = halogen-based compounds) was affected by long-range transport in the free troposphere over the marine boundary layer into Nevada. Data collected at these two locations demonstrate that different GOM compounds exist depending on the oxidants present in the air. Measurements of GOM made by the KCl denuder in the Tekran instrument located at the low elevation site were lower than that measured using membranes by 1.7-13 times. Accurate measurements of atmospheric concentrations and chemistry of RM are necessary for proper assessment of environmental impacts, and field measurements are essential for atmospheric models, which in turn influence policy decisions.
More Related Videos
11:19Measuring Carbon-based Contaminant Mineralization Using Combined CO2 Flux and Radiocarbon Analyses
Published on: October 21, 2016
06:52Experimental Column Setup for Studying Anaerobic Biogeochemical Interactions Between Iron OxyHydroxides, Trace Elements, and Bacteria
Published on: December 19, 2017
Related Concept Videos
Voltammetric Techniques: Linear-Scan (E vs Time)
Voltammetry: Overview
A voltammetric cell uses three electrodes: a working electrode, a reference electrode, and an auxiliary electrode. The redox reactions occur in the working...
The Scientific Method
Precipitation Titration: Endpoint Detection Methods
In the Volhard method, a standard excess of AgNO3 is first added to the...
Gravimetry: Overview
In precipitation gravimetry, the analyte is converted into a precipitate and weighed. For example, the silver content in a sample can be estimated by precipitating and...
Precipitation and Co-precipitation