On the use of strain sensor technologies for strain modal analysis: Case studies in aeronautical applications

This paper discusses the use of optical fiber Bragg grating (FBG) and piezo strain sensors for structural dynamic measurements. For certain industrial applications, there is an interest to use strain sensors rather than in combination with accelerometers for experimental modal analysis. Classical electrical strain gauges can be used hereto, but other types of strain sensors are an interesting alternative with some very specific advantages. This work gives an overview of two types of dynamic strain sensors, applied to two industrial applications (a helicopter main rotor blade and an F-16 aircraft), FBG sensors and dynamic piezo strain sensors, discussing their use and benefits. Moreover, the concept of strain modal analysis is introduced and it is shown how it can be beneficial to apply strain measurements to experimental modal analysis. Finally, experimental results for the two applications are shown, with an experimental modal analysis carried out on the helicopter main rotor blade using FBG sensors and a similar experiment is done with the aircraft but using piezo strain sensors instead.