Related Experiment Video
Updated: Mar 11, 2026

In Vitro Thrombosis Test for Ventricular Assist Devices
Published on: March 21, 2025
Externally visible thrombus partially predicts internal thrombus deposition in extracorporeal membrane oxygenators
Charles F Evans1, Tieluo Li1, Vikas Mishra1
1Department of Surgery, Division of Cardiac Surgery, University of Maryland School of Medicine, Baltimore, MD, USA.
Aim:
We sought to quantify the location and volume of thrombus in used hollow-fiber membrane oxygenators and correlate the volume of thrombus with patient demographics, flow characteristics and anticoagulation parameters.
Methods:
Hollow-fiber membrane oxygenators (Quadrox D, Maquet, Rastatt, Germany) were collected after clinical use in ECMO circuits and divided into sections. Each section was digitally imaged and analyzed using ImageJ software. The location and total volume (cm3) of thrombus was calculated for different sections. In an effort to predict thrombus formation, we correlated thrombus volume with possible aggravating and mitigating variables.
Results:
We collected 41 oxygenators from 27 patients. Twenty-seven (66%) were configured in the veno-venous mode and 14 (34%) in the veno-arterial mode. The median duration of use was 131 hours (interquartile range 61-214 hours). Eighteen (44%) were removed when the patient recovered, six (15%) were removed after withdrawal of care and seventeen (41%) were exchanged. The median volume of thrombus was 11.4 cm3 (interquartile range 2.2-44.5 cm3).
Conclusions:
A multivariable linear regression model suggested that the combination of median flow, configuration of ECMO and visible thrombus partially predicted internal thrombus volume (adjusted R2=0.39).
Related Concept Videos
Venous Thrombosis I: Introduction
Venous Thrombosis III: Interprofessional Care
Extracorporeal Removal of Drugs: Hemoperfusion and Hemofiltration
Pulmonary Embolism I: Introduction
Pulmonary Embolism II: Diagnostic Studies and Interprofessional Care
Oxygen Delivering System II: Venturi Mask and Transtracheal Oxygen
Venturi Mask
The Venturi mask, named after the Venturi effect, is designed to deliver precise oxygen concentrations. It consists of a large tube with an oxygen inlet that narrows down, causing a pressure drop that pulls air in through adjustable side ports. The mask is a lightweight,...

