Related Experiment Video
Updated: Mar 10, 2026

Preparation of Expanded Chitin Foams and their Use in the Removal of Aqueous Copper
Published on: February 27, 2021
A facile and green emulsion casting method to prepare chitin nanocrystal reinforced citrate-based bioelastomer
Xin Wang1, Kai Liang2, Yaling Tian1
1State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Material Science and Engineering, Donghua University, Shanghai 201620, China.
Abstract:
Chitin nanocrystal (ChiNC) is a promising reinforcing nanofiller for biomedical polymers. However, its self-aggregation characteristics caused processing difficulty in developing ChiNC-based nanocomposites. Herein, a new degradable crosslinked bioelastomer, designated as poly(1,8-octanediol-co-Pluronic F127 citrate) (POFC) was synthesized by melt polycondensation of citric acid, 1,8-octanediol, and Pluronic F127. In comparison to poly(1,8-octanediol citrate) (POC), POFC pre-polymer exhibited self-emulsifying property. Once ChiNC was introduced into the emulsion, a ChiNC stabilized Pickering emulsion was formed. Coupled with a facile green emulsion casting/evaporation method, the ChiNC ultimately reinforced ChiNC/POFC nanocomposite elastomer was fabricated. The presence of F127 segments endowed POFC with better hydrophilicity and shorter degradation time relative to POC. The incorporation of ChiNC into POFC network led to highly increased tensile modulus and strength. In vitro cytotoxicity tests indicated that the ChiNC/POFC elastomer nanocomposite had a good cytocompatibility and it appeared as a potential biomaterial for tissue engineering application.

