Related Experiment Video
Updated: Mar 8, 2026

Resource Recycling of Red Soil to Synthesize Fe2O3/FAU-type Zeolite Composite Material for Heavy Metal Removal
Published on: June 2, 2022
Influence of pH on heavy metal speciation and removal from wastewater using micellar-enhanced ultrafiltration
Jinhui Huang1, Fang Yuan1, Guangming Zeng1
1College of Environmental Science and Engineering, Hunan University, Changsha 410082, China; Key Laboratory of Environmental Biology and Pollution Control, Hunan University, Ministry of Education, Changsha 410082, China.
Abstract:
pH plays an important role in heavy metal removal during micellar-enhanced ultrafiltration (MEUF). In the present work, the influence of pH on heavy metal speciation and removal from wastewater by MEUF was investigated using an anionic surfactant (sodium dodecyl sulfate, SDS) and a hydrophilic membrane (polyether sulfone). Experiments were performed with pH values in the range of 1-12. Metal ion removal efficiency (R) was used to assess the effects of the MEUF process. Results showed that better removal rate of copper and cadmium was achieved at high pH values (pH > 3) with SDS feed concentration of 8 mM, while the optimal pH range was 3-10 for zinc and lead. The corresponding efficiencies for heavy metal removal decreased with the increasing feed concentration of metal ions under the pH conditions of 1-12. Furthermore, the heavy metal ion removal rate (50 mg/L) followed the order of Pb2+ > Cd2+ > Zn2+ > Cu2+. These results showed that pH is a key parameter in metal ion speciation and removal during MEUF.
More Related Videos
10:20Quantification of Heavy Metals and Other Inorganic Contaminants on the Productivity of Microalgae
Published on: July 10, 2015
09:23Removal of Trace Elements by Cupric Oxide Nanoparticles from Uranium In Situ Recovery Bleed Water and Its Effect on Cell Viability
Published on: June 21, 2015
Related Concept Videos
Extraction: Advanced Methods
Factors Affecting Solubility
Coagulation