Related Experiment Video
Updated: Mar 8, 2026

Applicability Analysis of Assessment Methods for Morphological Parameters of Corroded Steel Bars
Published on: November 1, 2018
Rapid assessment methodology in NORM measurements from building materials of Uzbekistan
A A Safarov1, A N Safarov2, A N Azimov2
1Samarkand State University, Samarkand, Uzbekistan; IAEA Nuclear Science and Instrumentation Laboratory, Physics Section, A-2444, Seibersdorf, Austria.
Abstract:
Utilizing low cost NaI(Tl) scintillation detector systems we present methodology for the rapid screening of building material samples and the determination of their Radium Equivalent Activity (Raeq). Materials from Uzbekistan as a representative developing country have been measured and a correction coefficient for Radium activity is deduced. The use of the correction coefficient offers the possibility to decrease analysis times thus enabling the express measurement of a large quantity of samples. The reduction in time, cost and the use of inexpensive equipment can democratize the practice of screening NORM in building materials in the international community.
More Related Videos
Related Concept Videos
Measurement of Air Content in Concrete
The pressure method,...
Estimation of the Physical Quantities
Strength of Cement
For compressive strength tests, ASTM C 109-05 standards prescribe a cement-sand mix ratio of 1:2.75 and a water/cement ratio of 0.485 for making 2-inch cubes. These cubes are mixed, cast, and cured in saturated lime water at 23°C until testing. Flexural strength testing, outlined in...
Moisture Content and Bulking of Aggregate
When aggregates are exposed to rain or sit in stockpiles, they absorb moisture, which must be...
Non-destructive Tests for Concrete Strength
Aggregate Cement Ratio

